EasyManua.ls Logo

Zebra MC93 Series - Page 114

Zebra MC93 Series
207 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Accessories
114
3.
Slide the switch to the ON position.
4. Place the device into the Ethernet cradle slot.
5. Touch eth0.
6. Touch Disconnect.
7. Touch eth0.
8. Touch the IP settings drop-down list and select Static.
9. In the IP address field, enter the proxy server address.
10. If required, in the Gateway field, enter a gateway address for the device.
11. If required, in the Netmask field, enter the network mask address
12. If required, in the DNS address fields, enter a Domain Name System (DNS) addresses.
13. Touch CONNECT.
14. Touch the Home button.
Establishing Ethernet Connection
1. Double-swipe down from the top of the Home screen to open the Quick Access panel and touch .
2. Touch Network & Internet > Ethernet.
3. Slide the Ethernet switch to the ON position.

Table of Contents

Other manuals for Zebra MC93 Series

Related product manuals