Zebra TC75 - Ethernet Settings; Configuring Ethernet Proxy Settings

2 - 26 TC75 Integrator Guide
Figure 2-29 Daisy-chaining 5-Slot Ethernet Cradles
4. Connect additional cradles as described in step 2 and 3.
Ethernet Settings
The following settings can be configured when using Ethernet communication:
• Proxy Settings
• Static IP.
Configuring Ethernet Proxy Settings
The TC75 includes Ethernet cradle drivers. After inserting the TC75, configure the Ethernet connection:
1. Touch > .
2. Touch Ethernet.
3. Place the TC75 into the Ethernet cradle slot.
4. Slide the switch to the ON position.
5. Touch .
6. Touch Advanced.
To Switch To Power Supply
To Power SupplyTo Next
Cradle