2 - 42 TC75 Integrator Guide
Figure 2-50 Swiping a Magnetic Stripe Card
5. Depending upon the application, the captured data appears.
Magnetic Stripe Reader Notification
MSR Notification (MSRN) application satisfies a PCI DSS requirement for a removable MSR device available as an
accessory for the TC75. It provides the means to verify authenticity of the paired the MSR and to provision the
associated MSR.
MSR Provisioning
In order to use an MSR with the TC75, and work properly with the MSRN, the MSR must be provisioned prior to
first use. After provisioning, a message displays whenever the attaching or removing the MSR. Up to 10 MSRs can
be provisioned to a single TC75. If an already provisioned MSR is damaged and must be replaced, the
replacement MSR must be provisioned prior to first use.
1. Attach the MSR to the TC75.
2. Touch > .
If this is the first time or after Factory/Enterprise reset, the change password screen displays. First time
password update is applicable only with default password. After an update, the application returns to the MSR
provisioning screen.
3. In the Password field, enter the password.
• If the MSR not connected, Press to pair MSR button is disabled.
PCI DSS compliance is required only for removable MSR used for payment.
To Next Page
Loading...
Need help?
General
