Zebra TC8000 User Manual

A - 6 TC8000 User Guide
SE4750-MR Decode Zones
Table A-5 lists the typical distances for selected bar code densities.
Table A-5 SE4750-MR Decode Distances
Symbology
Typical Working Range
Near Far
5 mil Code 128 7.4 in.
18.8 cm
16.0 in.
40.6 cm
5 mil PDF417 8.1 in.
20.6 cm
13.1 in.
33.3 cm
7.5 mil Data Matrix 8.3 in.
21.1 cm
12.8 in.
32.5 cm
10 mil Data Matrix 7.0 in.
17.8 cm
17.0 in.
43.2 cm
13 mil UPCA 2.3* in.
5.8* cm
38.0 in.
96.5 cm
15 mil Code 128 4.0* in.
10.2* cm
40.0 in.
101.6 cm
20 mil Code 39 2.1* in.
5.3* cm
54.0 in.
137.2 cm
100 mil Code 39 11.0 in.
27.9 cm
172.0 in.
436.9 cm
160 mil Data Matrix 11.5 in.
29.2 cm
138.0 in.
350.5 cm
* Limited by width of bar code in field of view.
Note: Photographic quality bar code at 18° tilt pitch angle under 30 fcd ambient illumination.
Distances measured from front edge of scan engine chassis.

Zebra TC8000 Specifications

General

Resolution	480 x 800 pixels
Storage	8 GB Flash
IP Sealing	IP65
Operating System	Android
Processor	1.7 GHz Dual-core
RAM	1 GB
Battery Capacity	6700 mAh
Connectivity	Wi-Fi, Bluetooth
Touch Panel	Capacitive
Scanning	1D/2D Barcode
Operating Temp	-20°C to 50°C
Drop Spec	8 ft./2.4 m drop to concrete
Display Size	4.0 inches