Zoom R24 - Manual Punch-In;Punch-Out; Playback

Manual punch-in/punch-out
30
Manual punch-in/punch-out
You can also punch in and out manually. Press the REC key during playback to start
re-recording from that point.
Start Stop
,iÀiVÀ`i`Ê«>ÀÌ
Re-recording
NOTE
UÊ *ÕVÉÕÌÊ ÛiÀÜÀÌiÃÊ ÌiÊ ÀiVÀ`}Ê Ê ÌiÊ
track.
UÊ vÊÌiÊÌÀ>VÊÃÊÃiÌÊÌÊNew Take, the track will be
silent before punching in and after punching out.
UÊ vÊÌiÊRECMODE is set to AlwaysNew]Ê>ÊiÜÊwiÊ
will be recorded.
UÊ 1ÃiÊÌiÊ
UNDO soft key to cancel the re-recording
and keep the previous take.
1
Raise the fader on the track
you want to re-record
2
Press 1-2 times
until lit red
When red, recording is possible
Adjust the recording
level and the
GAIN
to
be the same as the
already recorded part.
3
Prepare the track that you want to
punch-in/punch-out
4
Locate to before the
punch in point.
8
Press to stop recorder.
unlit
Re-recording: punch-in/punch-out
5
Press to start
playback.
Lit
Perform (not recording)
Press REC to punch-in and
start recording.
Lit
6
Press REC to punch-out,
stop recording and start
playback.
Lit unlit
7
Perform (recording)