EMG2306-R10A User’s Guide 137
CHAPTER 20
Maintenance
20.1 Overview
This chapter provides information on the Maintenance screens.
20.2 What You Can Do
•Use the General screen to set the timeout period of the management session (Section 20.3 on
page 137).
•Use the Password screen to change your EMG2306-R10A’s system password (Section 20.4 on
page 138).
•Use the Time screen to change your EMG2306-R10A’s time and date (Section 20.5 on page
140).
•Use the Firmware Upgrade screen to upload firmware to your EMG2306-R10A (Section 20.6 on
page 141).
•Use the Backup/Restore screen to view information related to factory defaults, backup
configuration, and restoring configuration (Section 20.8 on page 144).
•Use the Restart screen to reboot the EMG2306-R10A without turning the power off (Section
20.8 on page 144).
•Use the Sys OP Mode screen to select how you want to use your EMG2306-R10A (Section 20.11
on page 146).
20.3 General Screen
Use this screen to set the management session timeout period. Click Maintenance > General.
The following screen displays.
Figure 83 Maintenance > General
To Next Page
Loading...
