Chapter 7 Tutorials
EMG2306-R10A User’s Guide
46
7 Check the status of your wireless connection in the screen below. If your wireless connection is
weak or you have no connection, see Chapter 21 Troubleshooting section of this User’s Guide.
If your connection is successful, open your Internet browser and enter http://www.zyxel.com or the
URL of any other web site in the address bar. If you are able to access the web site, your wireless
connection is successfully configured.
7.4 Using Multiple SSIDs on the EMG2306-R10A
You can configure more than one SSID on a EMG2306-R10A when it is operating in access point or
universal repeater mode. This allows you to configure multiple independent wireless networks on
the EMG2306-R10A as if there were multiple APs (virtual APs). Each virtual AP has its own SSID,
wireless security type and MAC filtering settings. That is, each SSID on the EMG2306-R10A
represents a different access point/wireless network to wireless clients in the network.
Clients can associate only with the SSIDs for which they have the correct security settings. Clients
using different SSIDs can access the Internet and the wired network behind the EMG2306-R10A
(such as a printer). You can allow communication between wireless clients of different SSIDs in the
Configuration > Network > Wireless LAN > General screen. See Section 9.4 on page 73 for
more information.
To Next Page
Loading...
Need help?
General
