EMG2306-R10A User’s Guide 70
CHAPTER 9
Wireless LAN
9.1 Overview
This chapter discusses how to configure the wireless network settings in your EMG2306-R10A. See
the appendices for more detailed information about wireless networks.
The following figure provides an example of a wireless network.
Figure 31 Example of a Wireless Network
The wireless network is the part in the blue circle. In this wireless network, devices A and B are
called wireless clients. The wireless clients use the access point (AP) to interact with other devices
(such as the printer) or with the Internet. Your EMG2306-R10A is the AP.
9.2 What You Can Do
•Use the General screen to enter the SSID, select the channel, and configure wireless security
(Section 9.4 on page 73).
•Use the More AP screen to enable and configure multiple wireless networks (Section 9.6 on page
80)
•Use the MAC Filter screen to allow or deny wireless stations based on their MAC addresses from
connecting to the EMG2306-R10A (Section 9.7 on page 81).
•Use the Advanced screen to allow intra-BSS network and set the RTS/CTS Threshold (Section
9.8 on page 83).
To Next Page
Loading...
Need help?
General
