Chapter 8 WAN
EMG2306-R10A User’s Guide
59
8.4.2 Ethernet Encapsulation
This screen displays when you select Ethernet encapsulation.
Figure 25 Internet Connection: Ethernet Encapsulation
The following table describes the labels in this screen.
Table 15 Internet Connection: Ethernet Encapsulation
LABEL DESCRIPTION
ISP Parameters for Internet Access
Encapsulation Select the encapsulation type: PPPoE, PPTP, IPoE, or Bridge.
IPv4 / IPv6 Click the drop-down menu to select either an IPv4, IPv6 or dual stack interface.
IP Address Select Obtain an IP Address Automatically to have your ISP assign the parameters.
Select Static IP Address to enter a pre-defined IP Address, Subnet Mask, and
Gateway IP address.
To Next Page
Loading...
