Chapter 20 Maintenance
EMG2306-R10A User’s Guide
139
In User Account Entries in Maintenance > Account > User Account, click Edit icon under
Modify. The screen appears as shown.
Figure 85 Maintenance > Password
The following table describes the labels in this screen.
Table 60 Maintenance > Password
LABEL DESCRIPTION
Username The user account name.
Old Password Type the default password or the existing password you use to access the system in this
field.
New Password Type your new system password (up to 30 characters). Note that as you type a password,
the screen displays as asterisk (*) for each character you type.
Retype to
Confirm
Type the new password again in this field.
Group Shows the group belonging of the user account (read-only).
Apply Click Apply to save your changes back to the EMG2306-R10A.
Cancel Click Cancel to exit this screen without saving.
To Next Page
Loading...
