ZyXEL Communications EMG2306-R10A - Page 190

Appendix C Setting Up Your Computer’s IP Address
EMG2306-R10A User’s Guide
190
4 For dynamically assigned settings, select Using DHCP from the Configure IPv4 list in the TCP/IP
tab.
5 For statically assigned settings, do the following:
•From the Configure IPv4 list, select Manually.
•In the IP Address field, type your IP address.
•In the Subnet Mask field, type your subnet mask.
•In the Router field, type the IP address of your device.
6 Click Apply Now and close the window.