Chapter 5 Router Mode
EMG2306-R10A User’s Guide
30
Wireless LAN General Use this screen to configure wireless LAN and the level of wireless security
for the EMG2306-R10A.
More AP Use this screen to configure multiple BBs for the EMG2306-R10A.
MAC Filter Use the MAC filter screen to configure the EMG2306-R10A to block access
to devices or block the devices from accessing the EMG2306-R10A.
Advanced This screen allows you to configure advanced wireless settings.
QoS Use this screen to enable Wi-Fi Multimedia Quality of Service (WMM QoS).
WMM QoS allows you to prioritize wireless traffic according to the delivery
requirements of individual services.
WPS Use this screen to configure WPS.
WPS Station Use this screen to add a wireless station using WPS.
Scheduling Use this screen to schedule the times the Wireless LAN is enabled.
WDS Use this screen to set up Wireless Distribution System links to other access
points.
LAN IP Use this screen to configure LAN IP address and subnet mask.
IP Alias Use this screen to have the EMG2306-R10A apply IP alias to create LAN
subnets.
DHCP Server General Use this screen to enable the EMG2306-R10A’s DHCP server.
Advanced Use this screen to assign IP addresses to specific individual computers
based on their MAC addresses and to have DNS servers assigned by the
DHCP server.
Client List Use this screen to view the individual client list.
NAT General Use this screen to enable NAT.
Port
Forwarding
Use this screen to make your local servers visible to the outside world.
Port Trigger Use this screen to change EMG2306-R10A port triggering settings.
DDNS General Use this screen to set up dynamic DNS.
Static Route IP Static
Route
Use this screen to configure IP static routes.
Interface
Group
Interface
Group
Use this screen to add a LAN interface or a VLAN ID to a new group.
Security
Firewall General Use this screen to activate/deactivate the firewall and Anti-Dos Attack.
Services Use this screen to configure ICMP setting of the EMG2306-R10A.
Content Filter Content Filter Use this screen to block sites containing certain keywords in the URL.
Management
Remote
MGMT
WWW Use this screen to configure through which interface(s) and from which IP
address(es) users can use HTTP to manage the EMG2306-R10A.
Telnet Use this screen to configure through which interface(s) and from which IP
address(es) users can use Telnet to manage the EMG2306-R10A.
SNMP Use this screen to enable Wake on LAN to remotely turn on a device on the
local network.
TR069 Use this screen to configure the remote management over the WAN by an
Auto Configuration Server (ACS).
Import CA Use this screen to import certificates (digital IDs) to authenticate users.
UPnP General Use this screen to enable UPnP on the EMG2306-R10A.
Table 10 Navigation Panel: Router Mode (continued)
LINK TAB FUNCTION
To Next Page
Loading...
Need help?
General
