Chapter 7 Tutorials
EMG2306-R10A User’s Guide
48
6 Type a new password and retype it to confirm, then click Apply. Otherwise, click Ignore.
7 Go to Configuration > Network > Wireless LAN > More AP. Click the Edit icon of the first
entry to configure wireless and security settings for SSID_Worker.
8 Configure the screen as follows. In this example, you enable Intra-BSS Traffic for SSID_Worker
to allow wireless clients in the same wireless network to communicate with each other. Click Apply.
9 Click the Edit icon of the second entry to configure wireless and security settings for SSID_VoIP.
10 Configure the screen as follows. You do not enable Intra-BSS Traffic for SSID_VoIP. Click Apply.
To Next Page
Loading...
Need help?
General
