ZyXEL Communications EMG2306-R10A - Page 92

Chapter 10 LAN
EMG2306-R10A User’s Guide
92
The following table describes the labels in this screen.
Table 36 Configuration > Network > LAN > IP Alias
LABEL DESCRIPTION
IP Alias 1
Enable IP Alias 1 Check this to enable IP alias 1.
IP Address Type the IP alias address of your EMG2306-R10A in dotted decimal notation.
IP Subnet Mask The subnet mask specifies the network number portion of an IP address. Your
EMG2306-R10A will automatically calculate the subnet mask based on the IP address
that you assign. Unless you are implementing subnetting, use the subnet mask
computed by the EMG2306-R10A.
IP Alias 2
Enable IP Alias 2 Check this to enable IP alias 2.
IP Address Type the IP alias address of your EMG2306-R10A in dotted decimal notation.
IP Subnet Mask The subnet mask specifies the network number portion of an IP address. Your
EMG2306-R10A will automatically calculate the subnet mask based on the IP address
that you assign. Unless you are implementing subnetting, use the subnet mask
computed by the EMG2306-R10A.
Apply Click Apply to save your changes back to the EMG2306-R10A.
Reset Click Reset to begin configuring this screen afresh.