Configuring Information Center 1011
Setting to Output
System Information to a
Monitor Terminal
System information can also be output to a monitor terminal, which is a user
terminal that has login connections through the AUX, or VTY user interface.
Setting to output system information to a monitor terminal
Enabling the display of system information on a monitor terminal
After setting to output system information to a monitor terminal, you need to
enable the associated display function in order to display the output information
on the monitor terminal.
Follow these steps to enable the display of system information on a monitor
terminal:
Enable the display of log
information on the console
terminal logging Optional
Enabled by default
Enable the display of trap
information on the console
terminal trapping Optional
Enabled by default
To do… Use the command… Remarks
To do… Use the command… Remarks
Enter system view system-view -
Enable information center info-center enable Optional
Enabled by default
Name the channel with a
specified channel number
info-center channel
channel-number name
channel-name
Optional
Refer to Table 77 for default
channel names.
Configure the channel
through which system
information can be output to
a monitor terminal
info-center monitor
channel { channel-number |
channel-name }
Optional
System information is output
to the monitor terminal by
default with channel 1 as the
default channel.
Configure the output rules of
the system information
info-center source
{ module-name | default }
channel { channel-number |
channel-name } [ debug
{ level severity | state state }
* | log { level severity | state
state } * | trap { level severity
| state state } * ] *
Optional
Refer to Table 79 for the
default output rules of the
system information.
Configure the format of the
time stamp
info-center timestamp
{ debugging |
log | trap }
{ boot | date | none }
Optional
By default, the time stamp
format for log, trap and
debugging information is
date.
To do… Use the command… Remarks
Enable the monitoring of
system information on a
monitor terminal
terminal monitor Required
Enabled on the console
disabled on the monitoring
terminal by default.
To Next Page
Loading...
