3Com Switch 4800G 24-Port - Page 1012

1012 CHAPTER 82: INFORMATION CENTER CONFIGURATION
Setting to Output
System Information to a
Log Host
Setting to Output
System Information to
the Trap Buffer
Enable the display of
debugging information on a
monitor terminal
terminal debugging Required
Disabled by default
Enable the display of log
information on a monitor
terminal
terminal logging Optional
Enabled by default
Enable the display of trap
information on a monitor
terminal
terminal trapping Optional
Enabled by default
To do… Use the command… Remarks
To do… Use the command… Remarks
Enter system view system-view -
Enable information center info-center enable Optional
Enabled by default
Name the channel with a
specified channel number
info-center channel
channel-number name
channel-name
Optional
Refer to Table 77 for default
channel names.
Specify a log host and
configure the parameters
when system information is
output to the log host
info-center loghost host-ip
[ channel { channel-number |
channel-name } | facility
local-number ] *
Required
By default, the system does
not output information to a
log host. If you specify to
output system information to
a log host, the system uses
channel 2 (loghost) by default.
Configure the source
interface through which log
information can be output to
a log host
info-center loghost source
interface-type
interface-number
Optional
No source interface is
configured by default, and the
system selects an interface as
the source interface.
Configure the output rules of
the system information
info-center source
{ module-name | default }
channel { channel-number |
channel-name } [ debug
{ level severity | state state }
* | log { level
severity | state
state } * | trap { level severity
| state state } * ] *
Optional
Refer to Table 79 for the
output rules of the system
information.
Configure the format of the
time stamp for log
information
info-center timestamp
loghost { date |
no-year-date | none }
Optional
date by default.
To do… Use the command… Remarks
Enter system view system-view -
Enable information center info-center enable Optional
Enabled by default
Name the channel with a
specified channel number
info-center channel
channel-number name
channel-name
Optional
Refer to Table 77 for default
channel names.