Aanderaa ZPulse DCS 4420 User Manual

February 2020 – TD 266 OPERATING MANUAL – ZPulse® DCS 4420/4830/4520/4930 Page 113
9.5 SeaGuard applications
Leave to DCS mounted onto the SeaGuard Platform. Power the instrument; refer TD262a and TD262b for operating
instructions.
Open Administrative Tools -> Sensor Monitor.
Sensor Monitor can be used as a direct reading of the sensor; the
function is mainly used for test purposes.
Select the DCS from the list and press Start, refer Figure 9-1.
The next window shows sensor information like the
Node Description, Product name, Product number and
Serial number, refer Figure 9-2.
The number of sensor parameters and the processing time can be
viewed in the window.
Select an Update Interval for the sensor monitoring.
Press Start to start monitoring the sensor readings.
Figure 9-1 Select sensors to monitor
Figure 9-2 Set the update interval

Aanderaa ZPulse DCS 4420 Specifications

General

Brand	Aanderaa
Model	ZPulse DCS 4420
Category	Accessories
Language	English