February 2020 – TD 266 OPERATING MANUAL – ZPulse® DCS 4420/4830/4520/4930 Page 17
1.7 Sensor Properties
When using AADI Real-Time Collector you don’t need to think about the command string sent to the sensor since this is
fully controlled by the software, see CHAPTER 2 and CHAPTER 3.
Some properties of the ‘AiCaP’ sensor will not be applicable / visible when the sensor is connected to a SeaGuard,
SeaGuardII or SmartGuard Datalogger, as these properties will be controlled by the instrument.
All sensor properties are listed in chapters 1.7.1 through 1.7.4.
To Next Page
Loading...