February 2020 – TD 266 OPERATING MANUAL – ZPulse® DCS 4420/4830/4520/4930 Page 59
3.12.1 System Configuration DCS without Input Parameter Compass
System Configuration is
separated in 3 groups. The settings
in these groups are mainly used to
configure the sensor.
Refer chapter 1.7.3 for more
information on the properties in
System Configuration.
Refer chapter 3.12.3 through
3.12.6 for a description of each
group and settings.
Figure 3-26: System Configuration DCS without Input Parameter Compass