February 2020 – TD 266 OPERATING MANUAL – ZPulse® DCS 4420/4830/4520/4930 Page 31
When the updating process is finished a
confirmation will show up. Press Finish
to continue.
Figure 2-11: Configuration Update Completed
2.4 Deployment Settings
In the Device Configuration menu (refer
Figure 2-7) select Deployment Settings.
The Deployment Settings is separated in
2 groups. Except from the interval setting
all settings in this groups are mainly used
as information.
Refer chapter 1.7.2 for more information
on the properties in Deployment Settings.
In AiCaP mode more settings are
available. See chapter 3.10
For more information on each property see
chapter 2.4.1 and 2.4.2
Figure 2-12: Deployment Settings
To Next Page
Loading...