Page 60 February 2020 – TD 266 OPERATING MANUAL – ZPulse® DCS 4420/4830/4520/4930
3.12.2 System Configuration DCS with Input Parameter Compass
System Configuration is
separated in 4 groups. The settings
in these groups are mainly used to
configure the sensor.
Refer chapter 1.7.3 for more
information on the properties in
System Configuration.
Refer chapter 3.12.3 through 3.12.6
for a description of each group and
settings.
Figure 3-27: System Configuration DCS with Input Parameter Compass
3.12.3 Measurement
Figure 3-28: Measurement
To Next Page
Loading...