February 2020 – TD 266 OPERATING MANUAL – ZPulse® DCS 4420/4830/4520/4930 Page 123
• 3855 Set-up and configuration cable
• Non watertight Set-up cable with 9pin
D-suB for connection between 10pin
Lemo and PC for laboratory use only
10.2.2 For RS-422 use
Table 10-2: Available cables for RS-422
• 4860 Sensor Cable RS-422
• Free end cable for connection between
sensor and 3
rd
party logger
• 4902 Sensor Cable
• Sensor cable with 9pin D-suB for
connection between DCS and PC
• RS-422/RS-232 converter included