Section 6 Status Displays AC460 Subsystem Status Display
3BUR002418-600 A 125
AC460 Subsystem Status Display
The AC460 Subsystem Status Display, Figure 57, provides: node address and name;
controller address, name and status (active and backup); status of power supplies;
TC520 Monitor Status; fan and auxiliary input status; status for PM510 Processor
Module Cards and whether a card is currently a primary or backup; status and
address for DCN, TRIO, MVI, AF 100 - S800 I/O and S100 I/O submodules; TRIO,
S100, S800 and PROFIBUS logical LAN numbers; MVI Port type and status (A/B).
Select a controller to perform Switchover, Hard Reset or Reset for Upgrade
activities. Use the context menu to select the Diagnostic Message and System
Performance displays for a specific subdevice. Select the S800, S100, PROFIBUS,
or TRIO Overview (LAN) display by selecting the submodule display target.
Figure 57. AC460 Subsystem Status Display (Process Station)
To Next Page
Loading...
