ABB 800xA - Brkpts

Appendix A Runtime Templates BRKPTS
3BUR002418-600 A 319
BRKPTS
The Breakpoint Sets (BRKPTS) object is a child of CCF object. One BRKPTS
object is required for each breakpoint set being defined for the system. See Runtime
Version of Breakpoint Sets Templet on page 57.
NAME OF SET
The NAME OF SET field specifies the name of the linearization table used when
referencing the breakpoint set.
Valid entry is a string of up to 4 ASCII characters.
Default is: blank spaces
X VALUE
The X VALUE field specifies the x value for one of up to 11 x, y pairs for the
breakpoint table.
Valid entry is a floating point number.
Y VALUE
The Y VALUE field specifies the y value for one of up to 11 x, y pairs for the
breakpoint table.
Valid entry is a floating point number.