3BUR002418-600 A 31
Section 3 CCF Displays
Operational Displays for Configurable Control Functions
The format and functionality of each runtime display that supports the Configurable
Control Functions (CCF) is described here along with procedures for basic
operations that are executed from the displays. In addition, tuning and engineering
procedures are described. The runtime displays that support CCF are:
• Loop Detail.
• Loop Faceplate.
• Loop FCM.
• Loop Templets (Appendix A, Runtime Templates).
• Area Displays (Alarm, Status, and Graphic).
• Group Displays (Trend, Alarm, Status, and Graphic).
These basic operational displays are supported by runtime versions of the Loop
Definition and FCM Templets through the Loop FCM display. Continuous loops
perform indication, and calculation functions. Control loops provide output control
and PID loops provide output control with a setpoint. Device loops control discrete
devices such as fans and motors. The templets for these loops are described in the
Configurable Control Functions (CCF) User’s Guide.
To Next Page
Loading...
