Figure 15. Loop Templet Display
Engineer Tuning Displays for a Continuous Loop Section 3 CCF Displays
56 3BUR002418-600 A
Runtime Versions of Loop Definition and FCM Templets
The runtime versions of the templets are used to make the actual tuning changes.
The templets are accessed via the Loop FCM Display as described above. Their
format is similar to the configurator templets in AdvaBuild with the following
exceptions:
• The information is current since it come
s directly from the active database.
• Black values are tunable while the
grayed values are not.
• The AdvaBuild versions of the templets ha
ve different buttons.
• No FCM list is on the runtime version of the L
oop Definition Templet.
To Next Page
Loading...
