S800 Device Display Section 7 I/O Displays
156 3BUR002418-600 A
S800 Device Display
The S800 Device display is started by selecting a configured I/O device from the
S800 Station Display. The S800 Device display, Figure 70, shows information for
the device and each channel configured for the S800 I/O module (device diagnostics
are not displayed). Use the context menu to move up to the station and LAN
displays. From this display you can:
• Change channel output value.
• Select loop CCF tag and start loop faceplate.
• Select TLL point tag and start TLL faceplate.
• Select device configuration display.
Figure 70. S800 Device Status Display
To Next Page
Loading...
