Section 4 TCL Displays Loading the Sequence from the Unit Detail Display
3BUR002418-600 A 81
The information shown in the main portion of the display for each sequence in the
unit includes:
Each column width can be adjusted by clicking on the title border and sliding the
width indicator left or right.
Loading the Sequence from the Unit Detail Display
Note the ID of the sequence you want to download (refer to your AdvaBuild
documentation). Access the Unit Detail Display of the unit where the sequence is to
be downloaded.
To load a sequence onto a unit:
1. Select the Sequence Load Request field
2. Enter the ID for the desired sequence (optionally, you may load the sequence to
a slave unit by entering, SLAVE after the Sequence ID)
3. Press ENTER
Wait while the system downloads the sequence to the unit. The message
Loading Sequence sequence name
is displayed while the system downloads the sequence. When downloading is
complete, the sequence and its related data are shown in the list of sequences. The
initial state of a just-downloaded sequence is inactive.
Sequence ID Sequence program name.
Sequence Type Schedule, Procedure, or Operation.
Sequence State Active, Inactive, Paused, Loading.
Sequence Mode Auto, Manual, Semi_Auto.
Sequence Status Normal, Abnormal 1 - 16.
Step Text Current step in active sequence or if inactive, step executed
when sequence became inactive.
To Next Page
Loading...
