Appendix A Runtime Templates Digital Output FCM
3BUR002418-600 A 255
ENGU - LOWER BOUND Field
This field specifies the lower limit of the engineering units range. Valid entry is a
decimal number
ENGU - UPPER BOUND Field
This field specifies the upper limit of the engineering units range. Valid entry is a
decimal number.
UNDER RANGE COUNTS Field and OVER RANGE COUNTS Field
These fields indicate the lowest and highest count values that can be output. Valid
entries are integers between 0 and 4095.
Digital Output FCM
INVERTED OUTPUTS Field
This field makes modifications to the bit patterns output by the Digital Output FCM.
Valid entry is a decimal number translated into binary bit positions, specifying
which bits are inverted.
Pulse Duration Output FCM
COUNTS - UPPER BOUND Field
This field defines the length for the pulse duration (Pulse Duration Output) or the
number of pulses (Pulse Train Output) to treat as 100% of range. Valid entry is an
integer for the pulse duration in milliseconds or an integer for the number of pulses.
Pulse Train Output FCM
COUNTS - UPPER BOUND Field
This field defines the length for the pulse duration (Pulse Duration Output) or the
number of pulses (Pulse Train Output) to treat as 100% of range. Valid entry is an
integer for the pulse duration in milliseconds or an integer for the number of pulses.
To Next Page
Loading...
