Section 8 Operation Examples Selecting and Viewing a Control Loop
3BUR002418-600 A 195
Loop Faceplate (Auto/Local Mode) Tag description could indicate that this faceplate applies
to PID control loop. The data displayed applies only to
the loop which is identified by the tag name.
[Pv]
indicates the current measured value.
[Sp]
indicates the current setpoint value.
[Ou
t] indicates the current output value.
The current output high limit and low limit values are
sho
wn on the Out bar graph scale.
PID loop is operating in automatic with local setpoint
[LOC].
To adjust local setpoint from the faceplate, use the
set
point slider or the [Sp] entry field.
Loop Faceplate (Manual/Local)
Tag name could indicate that this faceplate applies to a
PID control
loop.
Current process temperature [Pv] is
31.72° C.
Current value of output in percent is being displayed
[Ou
t] 67.99.
Loop is operating in manual with local setpoint [LOC],
and Feedback [FB].
To adjust output in manual, use output slider or the [Out]
en
try field.
To Next Page
Loading...
