Device Loop Templet Appendix A Runtime Templates
224 3BUR002418-600 A
ALARM PRIORITY Field
This field specifies the priority level for any alarms occurring for the device.
Valid entries are:
HIGH high (priority 1)
MED medium (priority 2)
STD standard (priority 3)
POSTING ENABLE Field
This field indicates whether posting is enabled for the loop. Posting affects the way
alarm information is presented at the Operator Stations or Multibus-based consoles
and on the Alarm/Event Log.
Valid entries are:
YES enable posting
NO disable posting
SUPPRESS ALARMS Field
This field specifies whether the loop processor checks to see if the alarms defined by
this loop are active.
Valid entries are:
YES suppress alarms (do not check)
NO do not suppress alarms
DEVICE OVERRIDE Field
This field overrides the feedback timer. When set to YES, there are no Timeout
Alarms for the device. See the description of the TIMER field for a description of
Timeout Alarms.
Valid entries are:
NO_CHECK override the feedback timer
To Next Page
Loading...
