ABB 800xA - Page 24

General Section 2 Getting Started
24 3BUR002418-600 A
Log on as a Different User
The workplace uses Windows administration rights as the basis for its security
system. Operators have specific rights necessary to start and use the workplace. The
user rights associated with your logon name and password determines your security
level.
To log into the client station as an operator:
1. On the Windows Start Menu, select the user name in the upper right hand
corne
r, and then click Sign Out in the pop-up menu.
2. Press Ctrl+Alt+Del and choose the operator user.
3. Type the password and click the blue arrow.
Your status changes to the User Rights as defined in the User Manager and you
are
now logged in to the client station.
The Log Over function enables a fast and temporary
switch between users in a
running workplace. The log over changes the permissions and user roles but keeps
all open windows with their present contents. The permitted actions in the open
windows are controlled by the permissions of the logged over user. The log over
only affects the 800xA System permission. Windows security is still the same as the
user logged in.
To log over into the 800xA System as a new user:
1. Right click on the user name in bottom line of your workplace window and
se
lect Change User. A Change-user authentication dialog box appears.
If MOD specific displays are open, a Close View window will appear and the
listed MOD 300 displays must be closed before the user can be logged over.
2. Type your User ID with domain and password. If accepted, the dialog box
disappears and the new user can operate the workplace.
3. To return to the first user right clic
k on the user name again and select Revert
User. The Revert User operation requires authentication of the user to revert
to.