Name: ABB ACS880-07CLC
Brand: ABB
Rating: 5 (1 reviews)

Default Chapter3

1 Safety Instructions13

2 Introduction to the Manual21

3 Operation Principle and Hardware Description25

4 Mechanical Installation49

5 Guidelines for Planning the Electrical Installation65

Contents of this Chapter65
Limitation of Liability65
Selecting the Supply Transformer65
Selecting the Main Disconnecting Device65
Selecting the Main Contactor or Breaker66
Examining the Compatibility of the Motor and Drive66
- Protecting the Motor Insulation and Bearings66
- Requirements Table67
Selecting the Power Cables71
- General Rules71
- Typical Power Cable Sizes72
- Alternative Power Cable Types72
  - Recommended Power Cable Types72
  - Not Allowed Power Cable Types73
- Power Cable Shield73
Planning the Resistor Braking System74
Selecting the Control Cables74
- Shielding74
- Signals in Separate Cables74
- Signals Allowed to be Run in the same Cable74
- Relay Cable Type75
- Control Panel Cable Length and Type75
Routing the Cables75
- Separate Control Cable Ducts76
- Continuous Motor Cable Shield or Enclosure for Equipment on the Motor Cable76
Implementing Thermal Overload and Short-Circuit Protection76
- Protecting the Input Cabling and the Drive Upon a Short-Circuit76
- Protecting the Motor and Motor Cable in Short-Circuits76
- Protecting the Drive and the Power Cables against Thermal Overload76
- Protecting the Motor against Thermal Overload77
Protecting the Drive against Ground Faults77
- Residual Current Device Compatibility77
Implementing the Emergency Stop Function77
Implementing the Safe Torque off Function78
Implementing the Power-Loss Ride-Through78
Implementing a Bypass Connection78
Supplying Power for the Auxiliary Circuits78
Using Power Factor Compensation Capacitors with the Drive78
Using a Safety Switch between the Drive and the Motor79
Protecting the Contacts of Relay Outputs79
Implementing a Motor Temperature Sensor Connection80
- Connection of Motor Temperature Sensor to the Drive Via an Option Module81

6 Electrical Installation83

7 Control Units of the Drive103

8 Installation Checklist117

9 Start-Up119

10 Fault Tracing123

11 Maintenance125

12 Internal Cooling Circuit143

13 Technical Data151

14 Dimensions173

15 The Safe Torque off Function189

16 Resistor Braking203

Brand	ABB
Model	ACS880-07CLC
Category	Inverter
Language	English

ABB ACS880-07CLC Hardware Manual

Table of Contents

Other manuals for ABB ACS880-07CLC

Questions and Answers:

ABB ACS880-07CLC Specifications

Related product manuals