InformationStandard
Safety of machinery. Electrical equipment of machines. Part 1: General require-
ments.
IEC 60204-1:2005 +
A1:2008
EN 60204-1:2006 +
AC:2010
Low-voltage switchgear and controlgear assemblies -- Part 1: General rulesIEC/EN 61439-1:2009
EMC performance
Adjustable speed electrical power drive systems. Part 3: EMC requirements and
specific test methods
IEC/EN 61800-3:2004
Product requirements in North America
Industrial Control PanelsUL 508A 1st edition:2001
Enclosures for Electrical Equipment, Non-Environmental ConsiderationsUL 50 12th edition:2007
Industrial control equipmentCSA C22.2 No. 14-13:2013
Adjustable speed drivesCSA C22.2 No. 274-
13:2013
CE marking
A CE marking is attached to the product to signify that it conforms to all applicable European
Union legislation.
￭ Compliance with the European Low Voltage Directive
The compliance with the European Low Voltage Directive has been verified according to
appropriate European harmonized standards.
￭ Compliance with the European EMC Directive
The EMC Directive defines the requirements for immunity and emissions of electrical
equipment used within the European Union. The EMC product standard (EN 61800-3:2004)
covers requirements stated for drives. See Compliance with EN 61800-3:2004 (page 169).
￭ Compliance with the European Machinery Directive
The drive includes the Safe torque off function and can be equipped with other safety
functions for machinery which, as safety components, are in the scope of the Machinery
Directive. These functions of the drive comply with European harmonized standards such
as EN 61800-5-2.
Declaration of Conformity (According to Machinery Directive)
The Declaration of Conformity is delivered with the drive.
Compliance with EN 61800-3:2004
￭ Definitions
EMC stands for Electromagnetic Compatibility. It is the ability of electrical/electronic
equipment to operate without problems within an electromagnetic environment. Likewise,
the equipment must not disturb or interfere with any other product or system within its locality.
First environment includes establishments connected to a low-voltage network which supplies
buildings used for domestic purposes.
Second environment includes establishments connected to a network not supplying domestic
premises.
Technical data 169
To Next Page
Loading...
