ABB ACS880 N5700 Series - Page 19

DescriptionTerm
Optional digital I/O extension moduleFDIO-01
Optional DeviceNet™ adapter moduleFDNA-01
Optional I/O extension adapterFEA-03
Optional EtherCAT® adapter moduleFECA-01
Optional TTL incremental encoder interface moduleFEN-01
Optional TTL absolute encoder interface moduleFEN-11
Optional resolver interface moduleFEN-21
Optional HTL incremental encoder interface moduleFEN-31
Optional Ethernet adapter module for EtherNet/IP™, Modbus TCP
and PROFINET IO protocols
FENA-11
Optional Ethernet adapter module for EtherNet/IP™, Modbus TCP
and PROFINET IO protocols, 2-port
FENA-21
Optional Ethernet POWERLINK adapter moduleFEPL-02
Optional digital I/O extension moduleFIO-01
Optional analog I/O extension moduleFIO-11
Optional PROFIBUS DP® adapter moduleFPBA-01
Optional thermistor protection moduleFPTC-01
Optional ATEX-certified thermistor protection module for potentially
explosive atmospheres
FPTC-02
Optional RS-485 (Modbus/RTU) adapterFSCA-01
Optional functional safety modulesFSO-12, FSO-21
High-threshold logicHTL
Motor identification run. During the identification run, the drive will
identify the characteristics of the motor for optimum motor control.
ID run
Insulated gate bipolar transistorIGBT
Inverter unitINU
Inverter module(s) under control of one control unit, and related
components. One inverter unit typically controls one motor.
Inverter unit
IGBT supply unitISU
In a drive module, the converter between the AC supply network and
the DC link
Line-side converter
A communication link used by, for example, ABB controllers. ACS880
drives can be connected to the optical ModuleBus link of the control-
ler.
ModuleBus
In a drive module, the converter between the DC link and the motorMotor-side converter
With fieldbus protocols based on the Common Industrial Protocol
(CIPTM), such as DeviceNet and Ethernet/IP, denotes the control of
the drive using the Net Ctrl and Net Ref objects of the ODVA AC/DC
Drive Profile. For more information, see www.odva.org.
Network control
In the drive control program, user-adjustable operation instruction
to the drive, or signal measured or calculated by the drive.
In some (for example fieldbus) contexts, a value that can be accessed
as an object. For example, variable, constant, or signal.
Parameter
Introduction to the manual 19