faults (page 142). The parameter group also displays a list of faults and warnings
that have previously occurred.
Event word (parameters
04.40
…
04.72
)
Parameter 4.40 Event word 1 can be configured by the user to indicate the status
of 16 selectable events (ie. faults, warnings or pure events). It is possible to specify
an auxiliary code for each event to filter out other auxiliary codes.
QR Code generation for mobile service application
A QR Code (or a series of QR Codes) can be generated by the drive for display on
the control panel. The QR Code contains drive identification data, information on
the latest events, and values of status and counter parameters. The code can be
read with a mobile device containing the ABB service application, which then sends
the data to ABB for analysis. For more information on the application, contact your
local ABB service representative.
The QR Code can be generated by choosing Menu - Assistants - QR code on the
control panel.
550 Fault tracing
To Next Page
Loading...
