1
Introduction to the manual
What this chapter contains
This chapter describes the contents of the manual. It also contains information
on the compatibility, safety and intended audience.
Applicability
This manual applies to the ACS880 Position control program (option +N5700)
version 1.00 (loading package APCLx 1.00) or later; see detailed version information
below.
The version information can be checked from parameter group 7 System info, or
from System info using the Drive composer PC tool or an ACS-AP-x control panel.
InformationVersionParameter
C = ZCU target, B = BCU tar-
get
APCLC/B7.6 Loading package name
1.02.0.27.7 Loading package version
C = ZCU target, B = BCU tar-
get
APCFC/B7.4 Firmware name
3.40.2.27.5 Firmware version
APCAP7.23 Application name
1.2.0.17.24 Application version
Introduction to the manual 15
To Next Page
Loading...
