ABB ACS880 N5700 Series - Terms and abbreviations

CodeName
3AUA0000098062ACS880 drives with primary control program, quick startup guide
3AXD50000028574Adaptive programming application guide
3AUA0000127808Drive application programming manual (IEC 61131-3)
3AUA0000103295ACS880 diode supply control program firmware manual
3AUA0000131562ACS880 IGBT supply control program firmware manual
3AXD50000126880CIO-01 I/O module for distributed I/O bus control user’s manual
Option manuals and guides
3AUA0000085685ACS-AP-I, -S, -W and ACH-AP-H, -W Assistant control panels User’s
manual
3AUA0000094606Drive Composer start-up and maintenance PC tool user’s manual
Manuals and quick guides for I/O extension modules, fieldbus ad-
apters, encoder interfaces, etc.
1)
Available in the Document library.
You can find manuals and other product documents in PDF format on the Internet.
See section Document library on the Internet on the inside of the back cover. For
manuals not available in the Document library, contact your local ABB
representative.
Terms and abbreviations
DescriptionTerm
Industrial assistant non-Bluetooth control panelACS-AP-I
Industrial assistant control panel with Bluetooth interfaceACS-AP-W
Analog input; an interface for analog input signals.AI
Analog output; an interface for analog output signals.AO
Type of control unitBCU
I/O module for controlling cooling fansCIO
DC circuit between rectifier and inverterDC link
Distributed drives communication system protocolDDCS
Digital inputDI
Digital output; an interface for digital output signals.DO
Frequency converter for controlling AC motorsDrive
Direct torque control, a motor control methodDTC
Embedded fieldbusEFB
Analog I/O extension moduleFAIO-01
Fieldbus adapterFBA
Optional CANopen® adapter moduleFCAN
Optional ControlNet™ adapter moduleFCNA-01
DDCS communication module with two pairs of 10 Mbit/s DDCS
channels
FDCO-01
18 Introduction to the manual