ABB ACS880 N5700 Series - FBA a Data in

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
Selection of data to be transferred from drive to
fieldbus controller through fieldbus adapter A.
Note: 32-bit values require two consecutive parameters.
Whenever a 32-bit value is selected in a data parameter,
the next parameter is automatically reserved.
FBA A data in52
None / uint32Parameters 52.01…52.12 select data to be transferred
from the drive to the fieldbus controller through
fieldbus adapter A.
FBA A data in152.1
0None.None
1Control Word (16 bits)CW 16bit
2Reference REF1 (16 bits)Ref1 16bit
3Reference REF2 (16 bits)Ref2 16bit
4Status Word (16 bits)SW 16bit
5Actual value ACT1 (16 bits)Act1 16bit
6Actual value ACT2 (16 bits)Act2 16bit
11Control Word (32 bits)CW 32bit
12Reference REF1 (32 bits)Ref1 32bit
13Reference REF2 (32 bits)Ref2 32bit
14Status Word (32 bits)SW 32bit
15Actual value ACT1 (32 bits)Act1 32bit
16Actual value ACT2 (32 bits)Act2 32bit
24Status Word 2 (16 bits)SW2 16bit
See Terms and abbreviations (page 130).Other [value]
…………
None / uint32See parameter 52.1 FBA A data in1.FBA A data in1252.12
390 Parameters