ABB ACS880 N5700 Series - Input References

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
Values of references received from various sources.Input references3
All parameters in this group are read-only unless
otherwise noted.
0.00 / real32Local reference given from the control panel or PC tool.Panel reference3.1
1 = 10 / 100 = 1Local control panel or PC tool reference.-100000.00 ...
100000.00
- / real32Remote reference given from the control panel or PC
tool.
Panel reference 23.2
1 = 10 / 100 = 1Remote control panel or PC tool reference.-30000.00 ...
30000.00
0.00 / real32Reference 1 received through fieldbus adapter A.
See also chapter Fieldbus control through a fieldbus
adapter (page 627).
FB A reference 13.5
1 = 10 / 100 = 1Reference 1 from fieldbus adapter A.-100000.00 ...
100000.00
0.00 / real32Reference 2 received through fieldbus adapter A.FB A reference 23.6
1 = 10 / 100 = 1Reference 2 from fieldbus adapter A.-100000.00 ...
100000.00
0.00 / real32Reference 1 received through fieldbus adapter B.FB B reference 13.7
1 = 10 / 100 = 1Reference 1 from fieldbus adapter B.-100000.00 ...
100000.00
0.00 / real32Reference 2 received through fieldbus adapter B.FB B reference 23.8
1 = 10 / 100 = 1Reference 2 from fieldbus adapter B.-100000.00 ...
100000.00
- / real32Scaled reference 1 received through the embedded
fieldbus interface. The scaling is defined by 58.26 EFB
ref1 type.
EFB reference 13.9
1 = 10 / 100 = 1Reference 1 received through the embedded fieldbus
interface.
-30000.00 ...
30000.00
- / real32Scaled reference 2 received through the embedded
fieldbus interface. The scaling is defined by 58.27 EFB
ref2 type.
EFB reference 23.10
1 = 10 / 100 = 1Reference 2 received through the embedded fieldbus
interface.
-30000.00 ...
30000.00
- / real32Reference 1 received from the external (DDCS)
controller.
DDCS controller ref
1
3.11
The value has been scaled according to parameter
60.60 DDCS controller ref1 type.
See also section External controller interface (page 74).
1 = 10 / 100 = 1Scaled reference 1 received from external controller.-30000.00 ...
30000.00
- / real32Reference 2 received from the external (DDCS)
controller.
DDCS controller ref
2
3.12
The value has been scaled according to parameter 60.61
DDCS controller ref2 type.
140 Parameters