ABB ACS880 N5700 Series - Page 433

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
- / -Data received as word 1 from follower with node
address 3.
0...65535
- / uint16Displays, in integer format, the data received from the
second follower (ie. follower with node address 3) as
word 2.
Parameter 62.8 Follower node 3 data 2 sel can be used
to select a target for the received data. This parameter
can also be used as a signal source by other
parameters.
Follower node 3 data
2 value
62.32
- / -Data received as word 2 from follower with node
address 3.
0...65535
- / uint16Displays, in integer format, the data received from the
second follower (ie. follower with node address 3) as
word 3.
Parameter 62.9 Follower node 3 data 3 sel can be used
to select a target for the received data. This parameter
can also be used as a signal source by other
parameters.
Follower node 3 data
3 value
62.33
- / -Data received as word 3 from follower with node
address 3.
0...65535
- / uint16Displays, in integer format, the data received from the
third follower (ie. follower with node address 4) as word
1.
Parameter 62.10 Follower node 4 data 1 sel can be used
to select a target for the received data. This parameter
can also be used as a signal source by other
parameters.
Follower node 4
data 1 value
62.34
- / -Data received as word 1 from follower with node
address 4.
0...65535
- / uint16Displays, in integer format, the data received from the
third follower (ie. follower with node address 4) as word
2.
Parameter 62.11 Follower node 4 data 2 sel can be used
to select a target for the received data. This parameter
can also be used as a signal source by other
parameters.
Follower node 4
data 2 value
62.35
- / -Data received as word 2 from follower with node
address 4.
0...65535
- / uint16Displays, in integer format, the data received from the
third follower (ie. follower with node address 4) as word
3.
Parameter 62.12 Follower node 4 data 3 sel can be used
to select a target for the received data. This parameter
can also be used as a signal source by other
parameters.
Follower node 4
data 3 value
62.36
- / -Data received as word 3 from follower with node
address 4.
0...65535
Parameters 433