ABB ACS880 N5700 Series - Page 500

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
Odd / uint16(Visible when 92.1 Encoder 1 type = Absolute encoder)
Defines the use of parity and stop bits with a
HIPERFACE encoder.
Typically this parameter need not be set.
Hiperface parity92.45
0Odd parity indication bit, one stop bit.Odd
1Even parity indication bit, one stop bit.Even
4800 bits/s / uint16(Visible when 92.1 Encoder 1 type = Absolute encoder)
Defines the transfer rate of the link with a HIPERFACE
encoder.
Typically this parameter need not be set.
Hiperface baud rate92.46
04800 bit/s.4800 bits/s
19600 bit/s.9600 bits/s
219200 bit/s.19200 bits/s
338400 bit/s.38400 bits/s
64 / uint16(Visible when 92.1 Encoder 1 type = Absolute encoder)
Defines the node address for a HIPERFACE encoder.
Typically this parameter need not be set.
Hiperface node
address
92.47
- / -HIPERFACE encoder node address.0...255
500 Parameters