What to doCause
Event name /
Aux. code
Code
(hex)
Check the auxiliary code. Add 2 to the
code to find out the node address of
the faulted drive.
A follower drive has tripped.FollowerFF7E
Correct the fault in the follower drive.
Check the fault information provided
by the PLC.
A fault trip command has been
received through fieldbus adapter A.
FB A force tripFF81
Check the fault information provided
by the PLC.
A fault trip command has been
received through fieldbus adapter B.
FB B force tripFF82
Check the fault information provided
by the Modbus controller.
A fault trip command has been
received through the embedded
fieldbus interface.
EFB force tripFF8E
596 Fault tracing
To Next Page
Loading...
