Parameters and firmware blocks
270
Group 95 HW CONFIGURATION
Miscellaneous hardware-related settings.
95
95.01 CTRL UNIT SUPPLY FW block: None
Defines the manner in which the drive control unit is powered.
(0) Internal 24V The drive control unit is powered from the drive power unit it is
mounted on.
(1) External 24V The drive control unit is powered from an external power supply.
95.02 EXTERNAL CHOKE FW block: None
Defines if the drive is equipped with an AC choke or not.
(0) NO The drive is not equipped with an AC choke.
(1) YES The drive is equipped with an AC choke.
To Next Page
Loading...
