ABB ACSM1 - Group 10 START;STOP; Group 09 SYSTEM INFO

Parameters and firmware blocks
118
Group 09 SYSTEM INFO
09
9.01 DRIVE TYPE FW block: None
Displays the drive application type.
(2) ACSM1 Motion: Motion control application
9.02 DRIVE RATING ID FW block: None
Displays the inverter type of the drive.
(0) Unconfigured, (1) ACSM1-xxAx-02A5-4, (2) ACSM1-xxAx-03A0-4, (3) ACSM1-xxAx-04A0-4,
(4) ACSM1-xxAx-05A0-4, (5) ACSM1-xxAx-07A0-4, (6) ACSM1-xxAx-09A5-4,
(7) ACSM1-xxAx-012A-4, (8) ACSM1-xxAx-016A-4, (9) ACSM1-xxAx-024A-4,
(10) ACSM1-xxAx-031A-4, (11) ACSM1-xxAx-040A-4, (12) ACSM1-xxAx-046A-4,
(13) ACSM1-xxAx-060A-4, (14) ACSM1-xxAx-073A-4, (15) ACSM1-xxAx-090A-4,
(20) ACSM1-xxAx-110A-4, (21) ACSM1-xxAx-135A-4, (22) ACSM1-xxAx-175A-4,
(23) ACSM1-xxAx-210A-4, (24) ACSM1-xxCx-024A-4, (25) ACSM1-xxCx-031A-4,
(26) ACSM1-xxCx-040A-4, (27) ACSM1-xxCx-046A-4, (28) ACSM1-xxCx-060A-4,
(29) ACSM1-xxCx-073A-4, (30) ACSM1-xxCx-090A-4, (31) ACSM1-xxLx-110A-4,
(32) ACSM1-xxLx-135A-4, (33) ACSM1-xxLx-175A-4, (34) ACSM1-xxLx-210A-4,
(35) ACSM1-xxLx-260A-4, (63) ACSM1-390A-4, (64) ACSM1-500A-4, (65) ACSM1-580A-4,
(67) ACSM1-635A-4
9.03 FIRMWARE ID FW block: None
Displays the firmware name, eg, UMFI.
9.04 FIRMWARE VER FW block: None
Displays the version of the firmware package in the drive, eg, NNNN hex.
9.05 FIRMWARE PATCH FW block: None
Displays the version of the firmware patch in the drive.
9.10 INT LOGIC VER FW block: None
Displays the version of the logic in the power unit interface.
9.11 SLOT 1 VIE NAME FW block: None
Displays the type of VIE logic used in the optional module in option slot 1.
9.12 SLOT 1 VIE VER FW block: None
Displays the version of VIE logic used in the optional module in option slot 1.
9.13 SLOT 2 VIE NAME FW block: None
Displays the type of VIE logic used in the optional module in option slot 2.
9.14 SLOT 2 VIE VER FW block: None
Displays the version of VIE logic used in the optional module in option slot 2.