ABB Advant Controller 450 User Manual

$GYDQW

&RQWUROOHU8VHU¶V*XLGH
6HFWLRQ 3URFHVV,QWHUIDFH
3BSE 002 415R701 Rev A 3-11
,QWHUIDFHWR$SSOLFDWLRQ3URJUDP
Each board/unit/module is normally represented by aGDWDEDVHHOHPHQW. The same applies to
the individual channels of the board/unit/module. For a digital input board in the S100 I/O,
there is a superior DI board element and 32 Digital Input (channel) elements.
For an S400 I/O unit or S800 I/O module, there is a corresponding superior element defining the
unit (AX unit, DX unit) or module. Comparing the different I/O system S100 I/O, S400 I/O and
S800 I/O the individual channel elements are almost identical.
The superior elements are created by the user/configurer. As a result, the relevant individual
channel elements appear automatically.
Some board types listed below have one or several 3&HOHPHQWVas the interface to the
application program.
Pulse Counter and Frequency Measurement Module DP820:
Data Base Element DP820 is used to configure the module.
The following PC elements are used for communication with the module:
– DP820-I Read values from one channel
– DP820-O Issues commands for one channel.
Positioning Board DSDP 140A.
The following PC element are used for communication with the board:
– Pos -A Positioning - Analog control
– Pos -L Positioning - Length
– Pos -O Positioning - On/off.
Pulse Counter and Frequency Measurement Board DSDP 150:
Three different PC elements, COUNT-DP, FREQ-SP, and FREQ-MP, are used for varying
applications together with the board DSDP 150.
Pulse Counting and Frequency Measuring Board DSDP 170:
The following PC elements are used for communication with the board.
– PCU-COM Starts and supervises DSDP 170
– PCU-I Reads values from channels
– PCU-O Sets parameters and issues commands
– PCU-SS Gathers data from several channels simultaneously for up to
five boards.
Weighing boards DSXW 110 and DSXW 111:
The following PC elements are used for communication with the boards.
– SCALE Provides the logical interfacing between PC programs and the local
weighing function on the weighing board
– SCALEDOS Provides the logical interfacing between PC programs and the local
dosing function on the weighing board.

ABB Advant Controller 450 Specifications

General

Brand	ABB
Model	Advant Controller 450
Category	Controller
Language	English