ABB Advant Controller 450 User Manual

$GYDQW

&RQWUROOHU8VHU¶V*XLGH
&KDSWHU &RQILJXUDWLRQ$SS OLFDWLRQ%XLOGLQJ
3-24 3BSE 002 415R701 Rev A
*XLGHOLQHV0DVWHU%XV(H[HFXWHGLQVODYH&38
• You cannot mix MasterBus 300E (executed in slave CPU) and MasterBus 300E (executed
in main CPU) within the same controller.
*XLGHOLQHV%XV([WHQVLRQWR6,2
• S100 I/O Bus Extension is included on the Processor Module PM511.
• See separate hardware manuals for important restrictions on the distribution (cable
lengths, location, and so on) of the communication bus.
*XLGHOLQHV(;&20
• Communication interface CI531 has two ports V.24/RS-232-C. Each port can be used for
any combination of EXCOM, printer or MasterView 320.
*XLGHOLQHV956&
• Use the basic V.24/RS-232-C interface for printer and MasterView 320 communication.
• Communication interface CI531 has two ports V.24/RS-232-C. Each port can be used for
any combination of EXCOM, printer or MasterView 320.
*XLGHOLQHV5&20
• Communication interface CI532V01 has two ports. Both ports have the same protocol.
*XLGHOLQHV0XOWL9HQGRU,QWHUIDFH6WDQGDUG3URWRFRO
• Communication interface CI532Vxx or CI534Vxx has two ports. Both ports have the same
protocol.
• CI532Vxx is delivered with a standard protocol, for example RCOM, MODBUS,
Siemens. Different protocols are sold as different articles: CI532V01, CI534V02 and so
on. “V” stands for variant.
• Combining CI532Vxx, CI534Vxx, CI535 and CI538 is restricted, see Section 3.2.4.1,
Provided Link Types.
*XLGHOLQHV09,)UHHSURJUDPPDEOH&RPPXQLFDWLRQ
• The free-programmable MVI modules CI535/CI538 have two ports. Both ports have the
same protocol.
• CI535 and CI538 are delivered without protocol. The user defines the protocol.
• Combining CI532Vxx, CI534Vxx, CI535 and CI538 is restricted, see Section 3.2.4.1,
Provided Link Types.

ABB Advant Controller 450 Specifications

General

Brand	ABB
Model	Advant Controller 450
Category	Controller
Language	English