ABB Advant Controller 450 User Manual

Advant
®
Controller 450 User’s Guide
Section 5.5.2 Diagnostics and Fault Announcement
3BSE 002 415R701 Rev A 5-33
S100 I/O Bus Extender
Figure 5-13. System Status Display, S100 I/O Bus Extender
BE1
BE2
BE3
L
R
Status
Name
Description Type
1
“Description”
“Description”
“Description”
DSBC 174
DSBC 174
DSBC 174
Reference in S100 I/O Bus Extender Display:
Presentation:
Function :
Block Diagram:
User defined name
green filled The board is primary
red cr The board is erroneous
Supervision of S100 I/O Bus Extenders
1. Check the
communication link with respect to damage,
Plain System Message
at fault :
1
(default DB: item designation)
Status (L, R)
(R is only relevant when redundant
yellow cr The board is in warning status
loose conn
ector, broken wire, etc.
2. Replace th
e faulty bus extender DSBC 174 or DSBC 176
green empty The board is in backup
PBC STATUS
Bus Extender error Net xx Nod yy
bus extenders are used)
DIAGN.
(WARNING1)
DSBC 174/DSBC 176
DB; BEx
Hardware
Software
System status OS
DIAGN.
(WARNING2)
(ERR1)
(ERR2)
(ACTIVE)
“Name” “Descr” “Type”

ABB Advant Controller 450 Specifications

General

Brand	ABB
Model	Advant Controller 450
Category	Controller
Language	English