ABB Advant Controller 450 User Manual

Advant
®
Controller 450 User’s Guide
Chapter 5 Maintenance
5-64 3BSE 002 415R701 Rev A
DSDO 115 On-line replacement possible
Note! In general, the electrical connections between
output boards and the process is to be broken before the
board is extracted.
Alternative methods includes:
- Open terminal switches on the connection unit
- Disconnect cable which joins the board and
the connection unit
- Switch off relevant field power supply
DSDO 115A On-line replacement possible
Note! In general, the electrical connections between
output boards and the process is to be broken before the
board is extracted.
Alternative methods includes:
- Open terminal switches on the connection unit
- Disconnect cable which joins the board and
the connection unit
- Switch off relevant field power supply
DSDO 120A On-line replacement possible
Note! In general, the electrical connections between
output boards and the process is to be broken before the
board is extracted.
Alternative methods includes:
- Open terminal switches on the connection unit
- Disconnect cable which joins the board and
the connection unit
- Switch off relevant field power supply
DSDP 140A On-line replacement possible
Table 5-2. Replacement Aspects of Individual Board Types, S100 I/O (Continued)
Board type - Jumpering Comments
S1
S1
S2
S2
S1
X5
S1
S2
S1
R57
R58
S2
S4
S3

ABB Advant Controller 450 Specifications

General

Brand	ABB
Model	Advant Controller 450
Category	Controller
Language	English