ABB DCS550 - Ramp; Winderlogic (Winder Logic)

133
Winder
3ADW000379R0501 DCS550 Manual e e
Ramp
The standard
rpm ramp is re-configured for the winder control to become a line
speed ramp
.
WinderLogic
(winder logic)
The winder logic is reacting to the used winder control word
and thus generating the
control signals for all other winder blocks
. UsedWCW (61.17) contains all winder
depending commands. It is possible to write on the commands from the overriding
control system via the winder control word, see
WindCtrlWord (61.16), or via
parameters
. The normal command source should be automatic. Details see chapter
Appendix B: Firmware structure diagrams
.